Veeam Backup & Replication 6.0.0 x86+x64 [ENG]

Ответить на тему
 
Автор Сообщение

user ®

Стаж: 11 лет

Сообщений: 15151

Пост Пост: #1 от 09-Май-2012 11:45

[Цитировать]

Veeam Backup & Replication
Год/Дата Выпуска: 29.11.2011
Версия: 6.0.0
Разработчик: Veeam Software
Сайт разработчика: http://www.veeam.com
Разрядность: 32bit+64bit
Язык интерфейса: Английский
Таблэтка: Присутствует
Описание:
Veeam Backup & Replication – это быстрая, удобная и надежная защита данных и приложений в виртуальной среде. Veeam Backup & Replication сочетает возможности резервного копирования и репликации в одном продукте и представляет дополнительные преимущества защиты данных – как для VMware vSphere, так и для Microsoft Hyper-V.
Доп. информация:
Представленное разработчиком решение характеризуется улучшенной масштабируемостью, повышенной производительностью и усовершенствованными средствами репликации данных. Также сообщается о реализации функции мгновенного восстановления файлов гостевой операционной системы напрямую из резервной копии и оптимизации механизмов обработки и восстановления данных по WAN-каналам.
Особое внимание специалистами компании уделяется реализации в Veeam Backup & Replication 6 отсутствовавшей ранее поддержки платформы Hyper-V. Продукт не требует установки агентов для лицензирования, развертывания, поддержания или мониторинга, допускает создание резервных копий в инкрементальном режиме, обеспечивает работу со всеми виртуальными машинами, включая те, которые используют технологию кластеризованных томов (Cluster Shared Volumes), и может похвастаться встроенными функциями дедупликации и компрессии данных.
Системные требования:

VMware Infrastructure

Platforms
• vSphere 5.0
• vSphere 4.x
• Infrastructure 3.5 (VI3.5)
Hosts
• ESX(i) 5.0
• ESX(i) 4.x
• ESX(i) 3.5
Software
• vCenter Server 5.0 (optional)
• vCenter Server 4.x (optional)
• Virtual Center 2.5 (optional)

VMware Virtual Machines

Virtual Hardware
• Virtual machines with disks engaged in SCSI bus sharing a re not supported, because VMware does not support snapshotting such VMs.
• RDM virtual disks in physical mode, Indepen dent disks and disks connected via in-guest iSCSI initiator are not supported and are skipped from processing automatically.
OS
• All operating systems supported by VMware are supported.
• Microsoft VSS integration is supported for Windows XP (32bit only), Windows 2003, Windows 2003 R2, Windows Vista, Windows 2008, Windows 2008 R2 and Windows 7.
• Native file level restore supports Microsoft Windows file systems only (NTFS and FAT).
• Multi-OS file level restore wizard supports the following file systems:
OS Supported File Systems
Linux ext,ext2,ext3,ext4,ReiserFS,JFS,XFS
Unix JFS,XFS,UFS
Solaris ZFS
BSD UFS,UFS2
Mac HFS,HFS+
Windows NTFS,FAT,FAT32
• Multi-OS file level restore supports Linux LVM (Logical Volume Manager) and Microsoft Windows LDM (Logical Disk Manager) dynamic disks.
Software
• VMware Tools (optional)

Microsoft Hyper-V Infrastructure

Platforms
• Windows Server 2008 R2 SP1
Hosts
• Windows Server Hyper-V 2008 R2 SP1
• Microsoft Hyper-V Server 2008 R2 SP1
Software
• Microsoft System Center Virtual Machine Manager 2008 R2 SP1 (optional)

Hyper-V Virtual Machines

Virtual Hardware
• All virtual hardware is supported.
• Pass-through virtual disks and disks connected via in-guest iSCSI initiator are not supported and are skipped from processing automatically.
OS
• All operating systems supported by Hyper-V are supported.
• Microsoft VSS integration is supported for Windows XP (32bit only), Windows 2003, Windows 2003 R2, Windows Vista, Windows 2008, Windows 2008 R2 and Windows 7.
• File level restore supports Microso ft Windows file systems only (NTFS and FAT).
Software
• Hyper-V integration components (optional)

Veeam Backup & Replication Server

Hardware
CPU : modern x86/x64 processor (minimum 2 cores). Using faster multi-core processors improves data processing performance, and allows for more concurrent jobs.
Memory: 2048MB RAM (remote SQL server), 4096MB RAM (local SQL server). Using faster memory (DDR3) improves data processing performance.
Hard Disk Space: 300MB for product installation. 1 GB per 500 VM for guest file system catalog folder (persistent data). Sufficient free disk space for Instant VM Recovery cache (non-persistent data, at least 10GB recommended).
Network: 1 Gbps LAN for on-site backup, 1 Mbps or faster WAN for off-site backup and replication. High latency links are supported, but TCP/IP connection must not drop.
OS
Both 32 -bit and 64-bit versions of the following operating systems are supported:
• Microsoft Windows XP SP3
• Microsoft Windows Server 2003 SP2
• Microsoft Windows Vista SP2
• Microsoft Windows Server 2008 SP2
• Microsoft Windows Server 2008 R2 SP1
• Microsoft Windows 7 SP1
Software
• Microsoft SQL Server 2005/2008 (SQL 2005 SP4 Express is included in the setup)
• Microsoft .NET Framework 2.0 SP1 (included in the setup)
• Microsoft PowerShell 2 .0 or later (optional)
• System Center Virtual Machine Manager 2008 R2 Admin UI (optional, to be able to register SCVMM servers with Veeam Backup & Replication infrastructure)

Backup Proxy Server

Hardware
CPU : modern x86/x64 processor (minimum 2 cores). Using faster multi- core processors improves data processing performance, and allows for more concurrent jobs.
Memory: 2048MB RAM. Using faster memory (DDR3) improves data processing performance.
Hard Disk Space: 300MB.
Network: 1 Gbps LAN for on-site backup, 1 Mbps or faster WAN for off-site backup and replication. High latency links are supported, but TCP/IP connection must not drop.
OS
For VMware backup proxy server, both 32-bit and 64-bit versions of the following operating systems are supported:
• Microsoft Windows XP SP3
• Microsoft Windows Server 2003 SP2
• Microsoft Windows Vista SP2
• Microsoft Windows Server 2008 SP2
• Microsoft Windows Server 2008 R2 SP1
• Microsoft Windows 7 SP1
For Hyper-V off-host backup proxy server, only the following operating system is supported:
• Microsoft Windows Server 2008 R2 SP1 with Hyper-V role enabled

Backup Repository Server

Hardware
CPU : any x86/x64 processor.
Memory: 1024 MB RAM.
Network: 1 Gbps LAN for on-site backup, 1 Mbps or faster WAN for off-site backup and replication. High latency links are supported, but TCP/IP connection must not drop.
OS
Both 32-bit and 64-bit versions of the following operating systems are supported:
• Linux (must have SSH and Perl)
• Microsoft Windows XP SP3
• Microsoft Windows Server 2003 SP2
• Microsoft Windows Vista SP2
• Microsoft Windows Server 2008 SP2
• Microsoft Windows Server 2008 R2 SP1
• Microsoft Windows 7 SP1

Veeam Backup & Replication Enterprise Manager

Hardware
Processor : x86/x64 processor.
Memory: 2048MB RAM.
Hard Disk Space: 100 MB for product installation plus sufficient disk space to store guest file system catalog from connected backup servers (according to data retention policy).
Network: 1 M bps or faster connection to Veeam Backup & Replication servers .
OS
Both 32-bit and 64-bit versions of the following operating systems are supported:
• Microsoft Windows XP SP3
• Microsoft Windows 2003 SP2
• Microsoft Windows Vista SP2
• Microsoft Windows 2008 SP2
• Microsoft Windows 2008 R2 SP1
• Microsoft Windows 7 SP1
Server Software
• Microsoft Internet Information Services 5.1 or later ("IIS 6.0 Metabase Compatibility" and "Windows Authentication" components are required for IIS 7.0)
• Microsoft SQL Server 2005/2008 (SQL 2005 SP 4 Express included in the setup)
• Microsoft .NET Framework 2.0 SP1 (included in the setup)
Client Software
• Microsoft Internet Explorer 7.0 or later, or Mozilla Firefox 3.0 or later.
• Microsoft Excel 2003 or later (to view Excel reports)

Veeam Backup Search Server

Hardware
Refer to Microsoft Search Server system requirements.
OS
Refer to Microsoft Search Server system requirements.
Software
• Microsoft Search Server 2008 (including Express Edition).
• Microsoft Search Server 2010 (including Express Edition).

Backup Target

Backup can be performed to the following targets:
• Direct Attached Storage (DAS) connected to the backup repository server, including USB drives.
• Network Attached Storage (NAS) able to represent itself as CIFS (SMB) share (direct operation), or NFS share (must be mounted on Linux backup repository server).
• Storage Area Network (SAN). Backup repository server must be connected directly into SAN fabric via hardware HBA or software iSCSI initiator, and the corresponding volumes must be seen in the Microsoft Windows Disk Management snap-in).
-

Процедура инсталляции

1. Запускаем Veeam_Backup_Setup_x64.exe (Veeam_Backup_Setup_x86.exe)
2. При запросе лицензии запускаем keygen.exe и нажимаем на кнопку "Patch", при этом производится патчинг veComLic32.dll и veComLic64.dll.
3. Не закрывая keygen.exe генерим нужную нам лицензию и выбираем ее. Или используем готовую.
4. После завершения инсталляции останавливаем службы Veeam. Это производится нажатием на кнопку "Service" в keygen.exe, или стандартными средствами ОС через оснастку services.msc.
5. Запускаем заново keygen.exe если он не запущен и нажимаем на кнопку "Patch", при этом производится патчинг veComLic.dll.
6. Запускаем ранее остановленные службы Veeam. Это производится нажатием на кнопку "Service" в keygen.exe, или стандартными средствами ОС через оснастку services.msc.

Обновление торрента 27.12.2011

В раздачу добавлен Hotfix 1 for Veeam Backup 6.0.0
Patch Notes for Hotfix 1 for Veeam Backup 6.0.0
These are the 3 issues resolved by the hotfix #1 for Veeam Backup version 6.0.0.153
Issue 1 Direct SAN Access processing mode does not work for certain SAN makes and models.
Issue 2 Virtual Appliance (Hot Add) processing mode does not work when backup proxy is installed on localized version of Microsoft Windows.
Issue 3 Upgrade related issues affecting jobs created in v5 - poor incremenal backup performance, and large VIB file created on the first incremental run.

Обновление торрента 04.01.2012

1. Старый keygen заменён на новый.
2. Разархивированы дистрибутивы (по просьбам...).

Обновление торрента 30.01.2012

1. В раздачу добавлен Veeam Backup & Replication 6.0 Cumulative Patch 2.
2. Добавлен ещё один keygen.

Обновление торрента 19.02.2012

В раздачу добавлен Veeam Backup & Replication 6.0 Cumulative Patch 3.
These are the issues resolved by the Patch 3 for Veeam Backup version 6.0.0.153. All patches are cumulative so each below fix is contained in this patch.
• Application-aware processing fails for SQL server where Veeam configuration database is located.
• Cannot specify "0" in re-IP rule.
• Hot add operation can sometimes cause a very long backup source/target proxy Virtual Machine stun. This stun can be so long that it can cause all jobs using this backup proxy to fail due to timeout with:"Error: Client error: A connection attempt failed because the connected party did not properly respond after a period of time".
• CBT may fail on virtual disks other than Hard Disk 1 with the "Soap fault. A specified parameter was not correct" error when the hot add processing mode is used.
• Backup console UI freezes periodically (upon automatic refresh event) when there is a large number of managed objects exist.
• Any job processing the same Virtual Machine longer than 48 hours is forcibly terminated.The new timeout is set to 7 days.
• Very large jobs start failing with the "Failed to save file content" error after the VBM metadata file reaches 4 MB in size.
• Hyper-V CSV ownership change during backup or replication preparation process may take too long with certain storage devices, causing bug check (BSOD) on Hyper-V hosts.
• Hyper-V virtual disks with the disk file’s extension in capital letters (.VHD) are backed up like regular files, and not like virtual disks.
• Copying very large files to Linux or ESX host with service console credentials specified may fail.
Enhancements
• For VMware virtual machines with multiple disks, hot add was changed to only happen once for each processed virtual machine instead of multiple times, before each processed disk.
• Improved VMware replication failback performance by enhancing the virtual disk digest calculation process.
• Improved vPower NFS performance by removing some excessive logging.
• Changed the warning about outdated VMware Tools on the processed virtual machine to an information event.
• Removed CBT warning from the initial run of backup and replication jobs which have backup and replica mapping configured.
• Added support for adding Hyper-V with Veeam Backup and Replicationg installed. Previously, adding the host would fail with the "User credentials cannot be used for local connections" error.
• Improved bottleneck analysis formulas for proxy and network processing stages. For example, heavy backup target load should no longer affect the Network stage percent busy value.
Previously resolved by the Patch 2 for Veeam Backup version 6.0.0.153 (Build 6.0.0.164)
• Direct SAN Access processing mode does not work for certain SAN makes and models.
• Virtual Appliance (Hot Add) processing mode does not work when backup proxy is installed on localized version of Microsoft Windows.
• Upgrade related issues affecting jobs created in v5 - poor incremental backup performance, and large VIB file created on the first incremental run.
• Guest file system indexing fail on certain VMs with "Failed to index guest file system. Details: Error: Cannot read data from volume Win32 error: The handle is invalid. Code: 6"
• For v6 backup servers that were upgraded from v5, jobs fail to send email notifications if SMTP server requires authentication.
• Reversed incremental backup mode jobs scheduled to run on specific days only will also start on synthetic full backup day (as set under incremental backup mode options in the advanced job settings). Due to the same bug, Replication and VM Copy jobs will always start on Saturday (which is the default day for synthetic full backup).
• For jobs writing to CIFS-based backup repositories, backup results are not set in the selected VM attribute upon job completion.
• Added support for Cisco Nexus 1000V switch (port groups were not visible in UI).
• Added VM heartbeat check for Migration jobs. Original VM files will not be removed until the heartbeat is received. This was needed because it was reported that under certain circumstances (we were not able to reproduce this to date), the migration job fails to copy the virtual disk contents correctly, but nevertheless deletes the original.
• Under certain circumstances the job fails with the following error: "Client error: Cannot allocate memory for an array. Array size: [4198400]."
• For VMs configured to use VMware DVS (Distributed Virtual Switch), restore and replication into a different vCenter server will fail.
Previously resolved by the Patch 1 for Veeam Backup version 6.0.0.153 (Build 6.0.0.158)
• Direct SAN Access processing mode does not work for certain SAN makes and models.
• Virtual Appliance (Hot Add) processing mode does not work when backup proxy is installed on localized version of Microsoft Windows.
• Upgrade related issues affecting jobs created in v5 - poor incremenal backup performance, and large VIB file created on the first incremental run.
This patch is cumulative and compatible with version 6.0.0.153, 6.0.0.158, and 6.0.0.164
-

Скриншоты

Скриншоты окна About

Скачать

Скачать торрент! Veeam Backup & Replication 6.0.0 x86+x64 [ENG]

Как скачивать? · Что такое торрент? · Рейтинг и ограничения

Сайт не распространяет и не хранит электронные версии произведений, а лишь предоставляет доступ к создаваемому пользователями каталогу ссылок на торрент-файлы, которые содержат только списки хеш-сумм

[Профиль] [ЛС]
Показать сообщения:    
Ответить на тему

Текущее время: Сегодня 05:34

Часовой пояс: GMT + 4



Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете голосовать в опросах
Вы не можете прикреплять файлы к сообщениям
Вы не можете скачивать файлы